generator tips » 3 THE CEILING FAN WIND TURBINE CLASS PART 3

After some thought - the extra square magnets were bad. We want a conductor ring outside to bend the field back into the adjacent magnet as explained in your vid. The sq ones i had closed the air gap, but also connected to each other and closed the loop, effectively steering the field away from the stator back into the magnets. i will remove those and add a spacer to close air gap or leave as is.
Anyway, I see you did use a diode bridge to make a DC current, and I know that the batteries themselves will regulate voltage going out, but wouldn’t you have to put in a voltage regulator in-between the turbine and the batteries so you don’t fry your system?

1 comments

Write Down Your Responses